fasten screws, layout 8
Task: “Insert and tighten each screw into the nut of the same color.” DeepSeek-V4.1-Flash, code mode: 8 decisions, 39 motions, solved.
2× · 28 s of motion
- 1 of 8 · place.py
- 2 of 8 · place2.py
- 3 of 8 · pair.py
- 4 of 8 · pair.py
- 5 of 8 · pair.py
- 6 of 8 · pair2.py
- 7 of 8 · pair2.py
- 8 of 8 · final_check.py
- move_pose
- move_pose
- set_gripper
- move_pose
- move_pose
- move_pose
- move_pose
- move_pose
- move_pose
- move_pose
- move_pose
- set_gripper
- move_pose
- move_pose
- move_pose
- set_gripper
- move_pose
- move_pose
- move_pose
- move_pose
- move_pose
- move_pose
- move_pose
- set_gripper
- move_pose
- return_home
- move_pose
- move_pose
- set_gripper
- move_pose
- move_pose
- move_pose
- move_pose
- move_pose
- move_pose
- move_pose
- set_gripper
- move_pose
- return_home
Decisions
fasten_screws layout 8: Code mode · 8 decisions, solved
The recording is the robot's own cameras at 2×; the time between motions, while the model thinks, is not filmed. The 3D replay is the camera's picture in depth after each decision, with the paths it planned, to turn and step through.